shell-and-tube heat exchanger

英 [ʃel ənd tjuːb hiːt ɪksˈtʃeɪndʒə] 美 [ʃel ənd tuːb hiːt ɪksˈtʃeɪndʒər]

网络  管壳式换热器; 热交换器

化学



双语例句

  1. Numerical studies on combined multiple shell-pass shell-and-tube heat exchanger with helical baffles
    组合式多壳程螺旋折流板管壳式换热器数值模拟研究
  2. Analyze reason causing vibration of the shell-and-tube heat exchanger; discuss preventing vibration measures with example by using HTRI soft ware.
    分析管壳式换热器产生振动的原因,通过实例,利用HTRI软件讨论管壳式换热器防止振动的措施。
  3. The technologies of heat transfer enhancement for shell-and-tube heat exchanger have been applied in petrol and chemical industries.
    强化传热技术已广泛应用于石油、化工领域的管壳式换热器中。
  4. A Few Problems in the Design of Copper Pipe Shell-and-tube Heat Exchanger
    铜管&管壳式换热器设计中的几个问题
  5. The type selection of Shell-And-Tube Heat Exchanger and Plate Heat Exchanger
    平板式远红外线加热炉管壳式换热器与板式换热器选型参考
  6. The paper presents heat transfer enhancement research development in tube side of shell-and-tube heat exchanger, specially enumerating several heat transfer enhancement elements.
    简述了管壳式换热器管程强化的研究进展,着重介绍了几种强化传热管的研究情况。
  7. A new way modifying the classic way of determining the center-to-center distance in a shell-and-tube heat exchanger is put forward in this paper.
    本文提出对列管换热器列管间距经典计算公式的修正计算式。
  8. Numerical Simulation of Shell-and-tube Heat Exchanger and Research on Sideling-flow Heat Exchanger
    管壳式换热器数值模拟与斜向流换热器研究
  9. Numerical research on flow field and temperature field of shell side near-wall region of longitudinal shell-and-tube heat exchanger
    纵流壳程换热器壳程近壁区流场和温度场数值研究
  10. Study on Key Problems of Fluid Flow and Heat Transfer of Large-Scale Longitudinal Flow Shell-and-Tube Heat Exchanger
    大型轴流管壳式换热器流动与传热的若干关键问题研究
  11. Heat transfer enhancement of tube side is an important aspect of shell-and-tube heat exchanger intensified heat transfer.
    管程的强化传热是管壳式换热器强化传热的一个重要方面。
  12. Simplified Model of Two-Phase Stream Analysis Method in Shell-Side of Shell-and-Tube Heat Exchanger
    管壳式换热器壳侧简化两相流路分析法模型
  13. Numerical Investigation of Fluid Maldistribution of Shell-side of Shell-and-Tube Heat Exchanger with Longitudinal Flow
    轴流管壳式换热器壳侧流体优化分布数值研究
  14. Numerical simulation of shell-side flow and heat transfer characteristics in shell-and-tube heat exchanger Thermal exchanger has applied Afla Valve Plate Type Thermal Exchanger from Sweden.
    管壳式换热器壳程流体流动与换热的数值模拟换热器采用瑞典阿法拉阀板式换热器。
  15. Application of shell-and-tube heat exchanger with ring supporters in a 20 kt/ a sulphuric acid plant
    空心环管壳式换热器在20kt/a硫酸系统中的应用
  16. Intensified Heat-Transfer Mechanism of Pin-Finned Tube and Its Application in Shell-and-Tube Heat Exchanger
    针翅管强化传热机理及其在管壳式换热器中的应用
  17. By experimental research a unit flow model in shell-side of shell-and-tube heat exchanger, which iscommonly used in industry, was proposed.
    针对工业中广泛应用的管壳式换热器,通过实验研究,提出了壳侧单元流动模型。
  18. Structure characteristics of the shell-side of the shell-and-tube heat exchanger and laws of fluid flow and heat transfer are researched deeply, and "sideling flow" in the shell-side is researched especially.
    深入研究了管壳式换热器壳程结构特点及流体流动和传热规律,特别对换热器壳程流体中的斜向流进行了研究。
  19. Based on the second law analysis and exergy-economic evaluation of shell-and-tube heat exchanger, a heat exchanger cost equation is obtained.
    本文以管壳式换热器的第二定律分析和(?)经济评价为基础,提出了换热器费用方程。
  20. An experimental research on the air-water tow-phase flow void fraction in the shell-side of a segmentally baffled horizontal shell-and-tube heat exchanger model was carried out.
    本文对常温常压下空气-水两相流在卧式理想管壳式换热器壳侧流动时的截面含气率进行了实验研究。
  21. The new style energy saving shell-and-tube heat exchanger& shutter baffle heat exchanger is researched to improve and develop the structure of the shell-side.
    对壳程流体斜向流动的新型高效管壳式换热器一帘式折流片换热器进行了研究,这种换热器改进和发展了换热器壳程的结构形式。
  22. Stress Calculation of External Guiding Flow Cylinder of Shell-and-Tube Heat Exchanger
    管壳式换热器外导流筒接管区的应力分析
  23. The design and research of the paper has certain reference value to shell-and-tube heat exchanger especially U-tube heat exchanger engineering design.
    本文的设计与研究对于管壳式换热器尤其是U形管式换热器的工程设计具有一定的参考价值。
  24. In the design of shell-and-tube heat exchanger, we take transverse convex tube instead of smooth tube and hollow ring instead of baffle.
    在换热器设计中,采用横纹管取代光管、用空心环代替折流板支承,获得了良好的效果。
  25. Electrical probes were used to examine the influences of each stream on gas and liquid distributions in cross-flow zone of the shell-side in shell-and-tube heat exchanger under normal temperature and pressure.
    在常温常压下,应用电导探针,研究了TEMA-E型管壳式换热器壳侧各流路对错流区的气液分布状态的影响。
  26. Design and Analysis of Shell-and-Tube Heat Exchanger with Integrated Tube-box
    集成管箱型管壳式换热器的设计分析
  27. Effects of Leakage Flow Streams on Gas and Liquid Distributions in Shell-Side of Shell-and-Tube Heat Exchanger
    换热器壳侧泄漏流对气液两相分布的影响
  28. As a shell-and-tube heat exchanger condenser is important to power plant, steam and non-condensable gases is existed in shell side of condenser.
    作为管壳式换热器的凝汽器在电厂中有其重要的作用,而凝汽器壳侧是由凝结和不凝结气体组成。
  29. Shell-and-tube heat exchanger is a traditional kind of heat exchange equipment, which has been widely used in the process of thermal utilization of urban residential sewage.
    壳管式换热器作为传统换热设备,在污水冷热资源开发利用中得到较多应用,开展针对污水用管壳式换热器的研究在可再生能源建筑应用中具有重要的意义。